...

Commercial Air Duct Cleaning

Duct cleaning for offices, retail spaces and multi-unit buildings, planned around your hours and your tenants. We walk the building first, agree a clear scope and an upfront price, then clean zone by zone so the space keeps working.

Request Service in 30 Seconds






    Clean Ducts Without Closing the Building

    Commercial systems move far more air than a house, through larger trunks, longer runs and more diffusers, so they load up faster and spread what they carry to more people. Dust on desks, streaks on ceiling tiles and complaints about stuffy rooms are often the first sign that the ductwork needs attention.

    Our certified, licensed and insured technicians clean supply and return ductwork, ceiling diffusers, return grilles and the air handler compartment with agitation tools and HEPA extraction. The same inspection-first approach we use in homes applies, scaled to the building: we look at the air handlers, the trunks and a sample of diffusers before quoting.

    The difference on a commercial job is the plan. We agree the zones, the order and the working hours with you before the first ceiling tile is lifted, and each zone is closed and cleaned up before we move to the next, so staff, customers and tenants can keep using the rest of the building.

    Need Commercial Duct Cleaning Scheduled Soon?

    A fit-out just finished, a tenant is moving in or the complaints have started? Call (855) 501-0191 to book a walkthrough, 7 days a week, and we plan the cleaning zone by zone around your hours.

    Commercial Air Duct Cleaning Services

    Supply Ductwork and Trunks

    Commercial supply trunks run long distances above ceilings and feed many branch runs per zone. We reach them through existing access points and ceiling openings, connect HEPA extraction to hold the section under negative pressure, and clean with rotating brushes and air whips sized for larger ductwork. Each section is closed off before we move along the run.

    Ceiling Diffusers and Return Grilles

    Diffusers are where tenants see the problem: dark streaks on the diffuser face and on the ceiling tiles around it. We remove and wash diffusers and return grilles, clean the boot or plenum box behind each one, and refit them. Ceiling tiles near each opening are protected while we work.

    Return Plenums and Return Ducts

    Return air in many commercial buildings travels through ducted returns or through the space above the ceiling to the air handler. Ducted returns and the return plenum at the unit carry the heaviest dust load from occupied space, so they are cleaned with extra passes. Gaps found on the return side are reported, because they pull in dust from above the ceiling.

    Air Handler Blower Compartment

    A loaded blower wheel throws dust into clean ductwork and moves less air to every zone it serves. We clean the blower compartment and accessible blower wheel of each air handler in the scope, after the ductwork it feeds. Mechanical repairs to the units themselves are outside the cleaning and are left to your HVAC service provider.

    Offices

    Office floors are cleaned in sections before or after the working day, so desks stay usable and meetings go ahead. We cover workstations and equipment near each diffuser we open, and plan the zone order around the rooms your team needs first in the morning.

    Retail Spaces

    Sales floors are cleaned outside opening hours, with stock and displays covered near every opening. Stockrooms, where cardboard and packaging fibers are drawn into the returns, are included in the scope, and the sales floor is cleaned up before the doors open.

    Multi-Unit Buildings

    Common areas, corridors and shared returns are coordinated with the building manager and tenant access. Where units have their own systems, we schedule them in groups so each tenant knows when we will be inside. Laundry rooms with shared dryer vents can be added to the same visit.

    Property Management Portfolios

    Property managers get one contact, one schedule and one scope across the units or buildings they manage. We walk each property, price it upfront and agree an order that works around tenant move-ins, inspections and busy periods.

    After a Fit-Out or Renovation

    Construction dust from a fit-out is drawn into the returns while the work is going on and settles along trunks and in the return plenum. Cleaning once the trades have left gives the new space a clean start before staff or customers move in. Booking it into the end of the project schedule, after the last sanding and before furniture arrives, keeps the work simple and the space easy to protect.

    Tenant Turnover

    A unit turning over often comes with no record of when its ducts were last cleaned. Cleaning between tenants is the easiest time to work, with the space empty and no schedule to work around. The incoming tenant starts with clean ductwork, and the walkthrough gives the owner a current picture of the unit’s system, including any runs that need repair before the lease begins.

    Odor and Air Complaints

    A musty smell when the system starts, or repeated complaints about stuffy rooms, are worth tracing to the system before anything else. The walkthrough checks the diffusers, returns and air handler for buildup and tells you whether cleaning is the answer. If the cause is something else, such as a leaking return above the ceiling or a disconnected branch, we tell you that instead of selling a cleaning that will not fix it.

    What Business Customers Say

    4.7 average from 28 Google reviews across our 8 Google Business listings (listed as JS AirDuct). Every review shown is a real Google review.

    A
    Angel S.
    ★★★★★ Google review

    Our office AC smelled musty, so we called commercial air duct cleaning, and the team arrived on time and did a thorough job wow!

    S
    Shai E.
    ★★★★★ Google review

    We contracted a company to maintain our commercial vents and I highly recommend them. The atmosphere is clean and all people breathe without difficulties.

    How a Commercial Job Runs

    01

    Site Walkthrough

    We inspect the air handlers, trunks and a sample of diffusers and return grilles, and note access points, ceiling types and the zones each unit serves.

    Tell us about complaints, recent work and the hours the building is in use.

    02

    Scope and Upfront Price

    You get the zones, the sequence, the working hours and the price before you approve. Anything damaged we saw on the walkthrough is listed and priced separately, so the cleaning scope stays clear.

    03

    Scheduled Around You

    Work is booked for the hours you choose, before opening, after closing or on weekends, with appointments available 7 days a week. Tenants or staff can be told in advance exactly which zone is being cleaned and when.

    04

    Protect the Work Area

    Desks, stock, equipment and flooring near each opening are covered before a diffuser or ceiling tile comes out. Walkways stay clear for anyone still using the space.

    05

    Isolate the Zone

    Each zone is isolated and connected to HEPA extraction so the section is under negative pressure before agitation starts. Debris travels to the collector instead of into the occupied space around it.

    06

    Clean Ducts, Diffusers and Air Handler

    Supply and return runs are agitated with brushes and air whips, diffusers and grilles are washed and refitted, and the blower compartment is cleaned after the ductwork it feeds.

    07

    Handover

    We check airflow at the diffusers, clean up each zone and walk your manager or super through the finished areas. You hear about anything we found that needs repair, in plain terms.

    Why Choose Mint Air Duct Cleaning for Commercial Air Duct Cleaning?

    Property managers and business owners choose Mint Air Duct Cleaning because we plan commercial air duct cleaning around the building: a walkthrough before pricing, an upfront price, work scheduled around your hours and zone-by-zone cleaning with HEPA extraction while the rest of the space stays open. A commercial job is judged on the plan as much as the cleaning, so property managers get one contact and one scope, and our certified, licensed and insured technicians tell you honestly what the system needs.

    Certified, Licensed & Insured: Our technicians are certified and insured, and fully qualified for cleaning, repair and installation work on residential and commercial duct systems.
    Walkthrough Before Pricing: Air handlers, trunks and a sample of diffusers are inspected and the zones mapped before you see a price or approve any work.
    Upfront Pricing: You receive a clear price before work begins, with reasonable rates and no additional costs added at the end.
    Scheduled Around Your Hours: Work is booked before opening, after closing or on weekends, with appointments available 7 days a week, so the building keeps running normally.
    Zone-by-Zone Work: Only the area being cleaned is closed and held under negative pressure, while the rest of the building stays in use for staff and tenants.
    HEPA Extraction: Professional agitation tools and HEPA vacuum extraction that follow current industry standards, so buildup is removed, not just stirred up.
    One Contact for Property Managers: Property managers get one contact, one schedule and one scope across the units or buildings they manage, priced property by property.
    Honest Recommendations: Repair when repair is enough, replacement only when the ductwork can no longer be fixed reliably, and no aggressive upselling.

    Commercial vs Residential Duct Cleaning

    Commercial and residential duct cleaning use the same method, agitation tools with HEPA extraction under negative pressure, but they differ in scale, access and scheduling. A commercial building moves more air through larger trunks, longer runs and more diffusers, and it is reached through drop ceilings and access points rather than from each room. The work is booked around business hours and tenants, cleaned zone by zone, and agreed with a manager or property manager instead of one household.

    How a Commercial Job Runs

    Planned around the building and the people in it.

    Larger trunks, longer runs and more diffusers
    Access through drop ceilings and access points
    Work booked before opening, after closing or on weekends
    Cleaned zone by zone while the rest stays open
    Scope agreed with a manager or property manager

    How a Home Job Compares

    A single visit planned around one household.

    One or two systems with a run to each room
    Access from rooms, attic, basement or crawl space
    Visit window chosen by the homeowner
    Room by room with floors protected
    Walkthrough with the homeowner at the end

    Types of Air Ducts We Clean, Repair and Install

    The main types of air ducts in homes and commercial buildings are rectangular sheet metal, round spiral duct, insulated flex duct, duct board and fiberglass-lined metal duct. Each one collects dust, leaks and wears out differently, so the type of duct decides the cleaning tools, the sealing method and whether a damaged section is repaired or replaced. Our technicians identify the duct type during the inspection and match the work to it.

    Sheet Metal Ductwork

    Rectangular galvanized sheet metal is the standard material for main trunks and for ducts that must fit tight ceilings and walls. Its weak points are the many seams and joints, which we fasten mechanically and seal with mastic or foil tape.

    Spiral Duct

    Round galvanized steel duct formed with a continuous lockseam, so a run has fewer joints and less friction than rectangular duct. It needs more clearance, so it suits exposed ceilings, open commercial spaces and long straight runs.

    Insulated Flex Duct

    Flexible duct with its own insulation and outer jacket, common for branch runs in attics and crawl spaces. It works well only when pulled straight, strapped so it cannot sag and sealed to its collars; jackets crack with age and rodents chew through it.

    Duct Board

    Rigid insulated board formed into rectangular duct, so the insulation is the duct wall. It does not tolerate moisture or rough handling: older board crumbles at the edges and its tape lets go, so we tell you when a run should be replaced.

    Fiberglass-Lined Duct

    Sheet metal duct with an internal fiberglass liner that quiets airflow. Cleaning must not tear the liner, and according to the EPA no biocides are registered for use on fiberglass-lined duct or duct board, so sanitizing is limited on these runs.

    Signs a Building's Ducts Need Attention

    Common signs a building’s ducts need attention include a musty smell when the system starts, dust streaks on ceiling diffusers, stuffy offices or units, dust on desks that returns daily, uneven heating or cooling between zones and filters that load up long before their change date. Tenants and staff usually notice these before anyone opens a duct. They point to the air system rather than to the cleaning crew or the weather, and a fit-out or a change of tenant is a reason to check even when nobody has complained yet.

    01

    Musty Smell When the AC Starts

    An odor that rises in offices or units each time the system cycles on, usually from buildup on the return side or in the air handler.

    02

    Dust Streaks on Diffusers

    Dark marks on ceiling diffusers and the tiles around them, left by dust that the supply air carries out of dirty ductwork.

    03

    Complaints of Stuffy Rooms

    Some offices or units feel close and airless while others on the same system are fine, often because debris restricts their runs.

    04

    Dust on Desks and Shelving

    Desks, shelving and equipment that need wiping every day despite regular cleaning, because the system keeps blowing settled dust back out.

    05

    After a Fit-Out

    Construction dust drawn into the returns while a renovation or fit-out was going on, now settled along the trunks and return plenum.

    06

    Change of Tenant

    A unit turning over with no record of when its ducts were last cleaned, leaving the incoming tenant with whatever the last one left.

    07

    Uneven Heating or Cooling

    Some zones run warm or cold while the thermostat reads normal, a clue that air is not reaching every diffuser the way it should.

    08

    Dirty Filters Between Changes

    Filters loading up far faster than their change interval, which suggests the ducts or a leaking return are feeding the system extra dust.

    Ignoring these signs lets the complaints spread from zone to zone while the buildup keeps loading diffusers, returns and blower wheels. If several turn up across different areas, a walkthrough will show whether the ductwork is the common cause and what it would take to fix.

    What Causes Dust Buildup in Commercial Ductwork?

    Dust builds up in commercial ductwork from occupancy, long operating hours, fit-outs and renovations, filter maintenance gaps, stock and packaging fibers, leaking returns above the ceiling and tenant activity. Commercial systems run longer and serve more people than a home system, so the same sources add up faster and spread to more people when they do. Knowing which sources apply to your building tells us where the heaviest load will sit and which zones need the most passes during a commercial air duct cleaning.

    01

    Occupancy and Foot Traffic

    More people moving through a building means more dust, clothing fibers and skin flakes pulled into the return grilles every time the system runs.

    02

    Long Operating Hours

    Systems that run through a full working day, or longer, move more air and therefore more dust through the ducts than a typical home system.

    03

    Fit-Outs and Renovations

    Construction dust from fit-outs and renovations is drawn into the returns while the work goes on, especially in buildings that stay occupied during it.

    04

    Filter Maintenance Gaps

    Overdue or poorly fitted filters let dust slip past them and reach the blower wheel and the supply ducts that feed every zone.

    05

    Stock and Packaging

    Cardboard and packaging fibers from retail stockrooms are pulled into nearby returns and build up quickly on grilles, drops and the return plenum.

    06

    Return Leaks Above the Ceiling

    Gaps in ducted returns pull dusty air from the space above the ceiling straight into the system instead of air from the occupied rooms.

    07

    Tenant Activity

    Cooking and smoking inside units of multi-unit buildings leave a sticky residue on duct walls that holds dust and makes it harder to shift.

    What Affects Commercial Air Duct Cleaning Cost?

    The cost of commercial air duct cleaning depends on floor area and zones, the number of air handlers and diffusers, ceiling and duct access, the working hours, the level of buildup, whether the space is occupied and how many buildings or units are in the scope. We price commercial work from the site walkthrough rather than over the phone, because these factors decide how long each zone takes. You see the zones, the order, the hours and an upfront price before you approve anything.

    Floor Area and Zones: More floor area means more supply and return runs, more diffusers and more zones to isolate and clean under negative pressure, one at a time.
    Air Handlers and Diffusers: The number of air handlers, ceiling diffusers and return grilles in the scope sets the cleaning time, because each one is opened and cleaned.
    Ceiling and Duct Access: Drop ceilings, hard ceilings and roof units each need a different setup, and hard-to-reach trunks take longer to open and clean safely.
    Working Hours: Work booked before opening, after closing or on weekends shapes the schedule, the number of visits and how much can be done in each one.
    Level of Buildup: Heavy loads after a fit-out, or years of buildup in a busy building, take more passes with brushes and air whips than a light film of dust.
    Occupied or Vacant: Occupied spaces are cleaned in smaller sections to keep the rest of the building working, while a vacant space can be cleaned in larger runs.
    Number of Buildings or Units: A property management portfolio is walked, scheduled and priced property by property, so each building has its own clear scope and upfront price.

    Benefits of Commercial Air Duct Cleaning

    The benefits of commercial air duct cleaning are fewer dust complaints, cleaner diffusers and ceiling tiles, fewer start-up odors, airflow restored to blocked zones, a clean start for new tenants and early warning of damaged ductwork, without closing the building. For a facility or property manager, the results show up as fewer calls from staff and tenants and a system whose condition you know. We describe these results by what comes out of the ducts, not as health promises.

    01

    Fewer Dust Complaints

    Buildup that was blowing into offices and units is removed at the source, so staff and tenants have fewer reasons to call about dust.

    02

    Cleaner Diffusers and Ceilings

    Fewer dark streaks build up on ceiling diffusers and the tiles around them once the dust that marked them is out of the ductwork.

    03

    Fewer Start-Up Odors

    The buildup that held musty smells on the return side and in the air handler leaves the building with the rest of the debris.

    04

    Airflow Restored to Zones

    Runs and blower wheels cleared of debris move air again, which helps zones that felt stuffy get the airflow their diffusers were designed to deliver.

    05

    A Clean Start for New Tenants

    Units are handed over to incoming tenants with clean ductwork, and the owner gets a current picture of the system at the same time.

    06

    No Closure Needed

    Zone-by-zone work keeps the rest of the building open, so staff, customers and tenants carry on while one area at a time is cleaned.

    07

    Problems Found Early

    The walkthrough reports damaged, disconnected or leaking runs, so repairs can be planned before they turn into bigger airflow or dust problems.

    Ready to Book Commercial Air Duct Cleaning? Get an Upfront Price Today

    Call (855) 501-0191 or book online and a technician inspects first, explains the commercial air duct cleaning work your system needs and gives you a clear price before anything starts, 7 days a week.

    Our Complete Air Duct Services

    Mint Air Duct Cleaning offers a full set of duct and vent services alongside commercial air duct cleaning: general and residential duct cleaning, duct repair and replacement, duct installation, duct sealing, and dryer vent cleaning, installation and repair. Commercial properties often need repair, sealing or vent work at the same time as cleaning, for example a leaking return found during the walkthrough or shared laundry dryer vents in a multi-unit building. One team, one schedule and one contact can cover all of it.

    Whole-system cleaning of supply and return ducts, registers, trunk lines and the blower area, using agitation tools and HEPA extraction under negative pressure.

    Room-by-room cleaning of every accessible vent in houses, condos, townhouses and apartments, with floors protected and a walkthrough before we leave.

    Leaking, disconnected, crushed or deteriorated ducts found, repaired and resealed, or replaced section by section when repair is no longer practical.

    New supply and return runs for additions, remodels and reconfigured systems, sized for the rooms they serve, then fastened, sealed and tested.

    Leaking seams, joints and register boots mechanically fastened, then sealed with mastic and foil tape so conditioned air reaches the rooms.

    The full lint line from the back of the dryer to the exterior hood cleared of lint and blockages, followed by an airflow check.

    New or rerouted dryer vent lines built from rigid metal duct, with sealed joints and a proper wall or roof termination outside.

    Crushed or disconnected vents, loose joints and broken exterior hoods repaired, so hot, moist, lint-laden air leaves the building again.

    Commercial HVAC Systems We Clean

    We clean commercial duct systems connected to equipment from every major HVAC manufacturer, because commercial duct cleaning works on the ductwork, diffusers and air handler compartments, whoever made the unit. Rooftop units, split systems and indoor air handlers all move air through supply and return ductwork that collects the same dust. Repairs to the units themselves stay with your HVAC service provider. We clean systems connected to units from the major manufacturers, including:

    Carrier logo
    Carrier
    Trane logo
    Trane
    Lennox logo
    Lennox
    Rheem logo
    Rheem
    Goodman logo
    Goodman
    American Standard logo
    American Standard

    Inside the Equipment We Clean

    Photos from our own Google Business Profiles.

    Furnace blower wheel caked with dust before cleaning
    Blower wheel caked with dust before cleaning
    Google Business photo
    Blower motor and housing during a duct system cleaning
    Blower motor and housing during a system cleaning
    Google Business photo
    Dust-coated return air vent and grille
    Return vent and grille before cleaning
    Google Business photo

    Schedule Commercial Air Duct Cleaning With Mint Air Duct Cleaning

    Call (855) 501-0191 or send the booking form with the property type, the approximate floor area and the hours the building is in use. We book a walkthrough at a time that suits you, 7 days a week, then send back the zones, the order, the hours and an upfront price. Cleaning starts on the schedule you approve, zone by zone, so staff and tenants know in advance which area is being worked on.

    1
    Call (855) 501-0191 or Book Online
    2
    Tell Us About the Building and Its Hours
    3
    Book Your Site Walkthrough
    Book a service






      Air Duct Tips and Guides

      Residential Air Duct Cleaning: The Right Company You Should Hire
      Air Duct Cleaning

      What to look for when you hire a residential air duct cleaning company, from equipment and process to clear pricing.

      Prepare Your Home for the Upcoming Holidays With Clean Ducts
      Indoor Air Quality

      Why clean ducts before guests arrive, and how duct cleaning helps your home feel fresher during the holidays.

      Which Household Appliances Can Generate Mold Growth
      Mold & Moisture

      Household appliances that can create moisture and mold, and what that means for your air ducts.

      Commercial Duct Cleaning FAQs

      What is commercial HVAC duct cleaning?

      It is the cleaning of the parts of a building’s heating and cooling system that move air: supply and return ductwork, ceiling diffusers, return grilles and the air handler blower compartment. The work uses agitation tools and HEPA extraction under negative pressure, planned zone by zone around the building’s hours.

      Supply and return ductwork, ceiling diffusers, return grilles and the air handler blower compartment, using agitation tools and HEPA extraction. Anything we find damaged is reported and quoted separately.

      Dust streaks on diffusers and ceiling tiles, desks that need wiping every day, a musty smell when the system starts, filters loading up fast and complaints about stuffy or uneven zones. Several of these across different zones usually point to the ductwork.

      Yes. We schedule the work before opening, after closing or on weekends, and appointments are available 7 days a week. The zone order is planned so the areas you need first in the morning are finished and cleaned up before your team or customers arrive.

      No. We clean one zone at a time, so only the area being worked on is closed while the rest of the building stays in use. Each zone is held under negative pressure with HEPA extraction while it is cleaned, which keeps the loosened dust out of the occupied areas next to it.

      Yes. Units are scheduled in groups with the building manager, so each tenant knows when we will be inside. The work area stays inside the unit, and floors and furniture near each vent are covered.

      It depends on floor area, the number of air handlers and diffusers, and access. The walkthrough sets the schedule, and you see it with the price before you approve. Larger buildings are usually split across several visits, one group of zones at a time, so each visit fits inside the hours you have chosen.

      There is no single interval. Occupancy, dust from operations, renovations and tenant changes decide it, so we recommend an inspection when complaints start, after a fit-out or when a space turns over.

      Disruption is limited to the zone being cleaned. Work areas are covered, debris goes into HEPA extraction and each zone is cleaned up before we move on.

      A poorly done cleaning can stir dust into the space or damage ductwork, and cleaning that skips the air handler leaves a source of dust behind. That is why we hold each section under negative pressure, clean the blower compartment and agree the scope before starting.

      Yes. One contact and one schedule can cover the properties you manage. See our service areas to check coverage.

      Plan Your Building's Duct Cleaning

      Walkthrough first, a clear scope with zones, order and hours, an upfront price, then zone-by-zone cleaning with HEPA extraction while the building stays open.

      Call (855) 501-0191 or send the form, 7 days a week.

      Book a service






        Seraphinite AcceleratorOptimized by Seraphinite Accelerator
        Turns on site high speed to be attractive for people and search engines.