...

Air Duct Repair and Replacement Services

Get professional air duct repair and replacement services from Mint Air Duct Cleaning for damaged, leaking, disconnected, or deteriorated ductwork. Our certified and insured HVAC technicians inspect existing air ducts, locate leaks, repair holes and cracks, reconnect loose sections, seal damaged joints, and replace failing ductwork when repairs are no longer practical, helping reduce air loss and restore consistent airflow throughout your home.

Request Service in 30 Seconds






    Professional Ductwork Repair and Replacement for Damaged, Leaking, or Failing Ducts

    Mint Air Duct Cleaning provides comprehensive residential and commercial air duct repair and replacement services for damaged, leaking, disconnected, deteriorated, or poorly performing ductwork. Rather than recommending unnecessary full-system replacement, our insured HVAC technicians assess existing duct networks to identify structural damage, air leaks, and airflow problems. We recommend practical repair or replacement solutions based on duct condition to improve air distribution and indoor comfort.

    Air duct damage often begins with holes, cracks, loose connections, or poorly sealed joints that allow heated or cooled air to escape before reaching individual rooms. Over time, aging materials, moisture exposure, and physical damage can worsen these problems. To address these issues, our insured HVAC technicians inspect accessible duct sections, locate leaks, and reconnect separated components. When the existing ductwork cannot be reliably repaired, we recommend replacing the affected sections.

    Call (855) 501-0191 to schedule air duct repair or replacement services with Mint Air Duct Cleaning. Our team will inspect your ductwork, explain the identified problems, review suitable repair or replacement options, and complete the approved work to address damage.

    Need Duct Repair Right Now?

    Leaking, crushed or disconnected ducts waste conditioned air every hour the system runs. Call (855) 501-0191 and we book a technician to inspect your ductwork, 7 days a week.

    Common Air Duct Repair and Replacement Problems We Fix

    Leaking Air Ducts

    Mint Air Duct Cleaning repairs leaking air ducts by identifying air loss along main supply trunks, branch connections, and register boots where seals or joints have deteriorated. Our insured HVAC technicians inspect accessible duct runs, examine seams, and assess surrounding sheet metal or flexible duct materials. When the ductwork remains structurally sound, we secure loose connections, apply suitable mastic sealant, and reinforce affected seams with approved foil tape where appropriate. These repairs help reduce conditioned air loss and improve airflow throughout the duct system.

    Disconnected Duct Sections

    For residential and commercial properties facing disconnected duct sections, we offer repairs that reattach loose runs and prevent conditioned air from dumping into attics, basements, or crawl spaces. Building movement, failed hanging straps, or accidental impacts often pull flexible ducting off metal collars or split sheet metal joints apart. Depending on the condition of the separated pieces, Mint Air Duct Cleaning mechanically fastens the existing duct run or installs new connection fittings before sealing every joint, ensuring proper air delivery is restored throughout your property.

    Duct Holes and Cracks

    Our certified and insured HVAC technicians repair duct holes, tears, and physical cracks to prevent conditioned air from escaping while keeping dusty attic or crawl space air out of your ventilation stream. Our HVAC technicians examine open punctures to determine if localized patching is effective or if structural deterioration requires replacing that section. We seal small holes and jacket tears using durable metal patches, professional mastic sealant, and approved foil tape, ensuring the duct wall is fully reinforced and completely airtight for reliable daily performance.

    Poorly Sealed Duct Joints

    We repair poorly fitted duct joints and failing seams that result from deteriorated cloth tape or improper original installation methods. Unsealed connections cause continuous air seepage across your entire duct network, reducing static pressure and forcing your heating and cooling equipment to run longer cycles. Mint Air Duct Cleaning removes failed adhesives, mechanically fastens loose joints with sheet metal screws or heavy-duty draw bands, and applies professional mastic sealant to create an airtight, long-lasting seal at every duct connection.

    Damaged Ductwork

    Mint Air Duct Cleaning repairs damaged ductwork, addressing crushed flexible lines, dented sheet metal trunks, moisture corrosion, and localized wear caused by age or physical impacts. During your inspection, our HVAC technicians evaluate whether damaged sections can be reshaped and re-supported or if severe deterioration requires full section replacement. We straighten sagging runs, install heavy-duty hangers, and replace severely crushed or corroded duct lengths with matching, fully insulated materials to eliminate air restrictions and protect your system’s performance.

    Weak or Uneven Airflow

    For residential and commercial properties facing weak or uneven airflow, we offer repairs that locate and resolve hidden leaks, collapsed flexible runs, and disconnected branch lines restricting air delivery. Poor duct conditions prevent proper volume from reaching supply registers, creating uncomfortable temperature variations between rooms. By focusing strictly on ductwork causes, Mint Air Duct Cleaning fixes underlying structural bottlenecks and seals air leaks that rob your system of static pressure, restoring balanced heating and cooling comfort across all your living spaces. Air Duct Replacement Services

    Noisy Air Ducts

    Mint Air Duct Cleaning repairs noisy air ducts that rattle, whistle or vibrate while the heating or cooling system runs. Those sounds usually point to loose duct connections, air leaks at joints and seams, or damaged sections that move when air pushes through them. Our certified and insured HVAC technicians trace the noise to the run it comes from, re-secure loose collars and takeoffs, replace failed hangers so sagging ducts stop moving, and seal leaking joints with professional mastic sealant and approved foil tape. When a section is too damaged to quiet with repairs, we explain the replacement option and its upfront price before any work begins.

    Damaged Air Duct Replacement

    Mint Air Duct Cleaning replaces damaged air ducts when crushed sections, severe punctures, broken connections, or structural defects make localized repairs impractical. These problems can restrict airflow, release conditioned air, and reduce heating or cooling delivery to connected rooms. Our insured HVAC technicians inspect the affected duct runs, assess surrounding connections, and identify sections that require removal. We install compatible replacement ductwork, secure the new connections, and seal accessible joints to help restore reliable airflow without unnecessarily replacing the entire duct system.

    Old and Deteriorated Duct Replacement

    Our certified and insured HVAC technicians replace old and deteriorated duct systems that have lost their structural integrity due to decades of continuous expansion, contraction, and material aging. Older ductwork frequently features crumbling insulation, degraded fiberboard, or brittle metal seams that continuously shed debris and leak conditioned air into unconditioned spaces. Mint Air Duct Cleaning removes the outdated materials and installs modern, durable duct systems designed to maximize energy efficiency and improve overall indoor air quality.

    Attic Duct Replacement

    We replace damaged, sagging, or uninsulated attic ductwork that suffers from extreme temperature fluctuations, pest intrusion, and structural wear over time. Attic duct systems face harsh environmental conditions that degrade outer vapor barriers and cause internal fiberglass insulation to break down, driving up utility bills. Mint Air Duct Cleaning safely navigates attic spaces to extract failing runs, install properly supported and fully insulated replacement ductwork, and seal all connection points to prevent conditioned air loss in high-heat zones.

    Water or Moisture Damaged Ductwork

    Mint Air Duct Cleaning replaces water-soaked, mold-compromised, or moisture-damaged ductwork and ruined insulation caused by roof leaks, plumbing drips, or severe condensation issues. When moisture saturates flexible duct liners or damages rigid duct board, the material can no longer maintain safe hygiene standards or structural strength. Our HVAC technicians remove the affected sections, address underlying moisture concerns, and install clean, dry, commercial-grade replacement ducts to safeguard your indoor environment.

    Fire or Physical Damage

    For residential and commercial properties facing fire, smoke, or major structural impact damage, we offer expert duct replacement services to restore safe ventilation operations. Extreme heat and smoke exposure can melt flexible ducting, warp sheet metal trunks, and deposit harmful residues throughout the entire distribution network. Mint Air Duct Cleaning replaces all compromised components, clears the remaining system pathways, and installs brand-new, certified ductwork to ensure safe, reliable, and clean airflow delivery. Air Duct Repair and Replacement by Property Type

    Residential Air Duct Repair and Replacement

    Mint Air Duct Cleaning provides residential air duct repair and replacement services tailored to single-family homes, townhouses, and multi-family apartments. Our certified and insured HVAC technicians address damaged, leaking, disconnected, or deteriorated household ductwork located in attics, crawl spaces, and basements. Whether your system requires sealing localized seam leaks, reconnecting loose flex runs, or replacing aging duct sections, we restore proper airflow distribution, eliminate hot and cold spots, and help keep your home comfort system operating efficiently.

    Commercial Air Duct Repair and Replacement

    For commercial buildings, office spaces, and multi-family property management firms, we deliver commercial air duct repair and replacement services designed to minimize workplace disruption. Commercial forced-air systems feature complex main trunks, branch distribution networks, and specialized zoning controls that require precise pressure balancing. Our HVAC technicians evaluate accessibility, repair structural metal seam leaks, re-secure disconnected runs, and replace failing commercial duct sections while adhering to commercial building specifications and operational schedules.

    Industrial Air Duct Repair and Replacement

    Mint Air Duct Cleaning offers industrial air duct repair and replacement services for larger facility duct networks, heavy-duty ventilation runs, and multi-zone distribution layouts. Industrial duct systems face significant static pressure demands, environmental exposure, and structural wear over extended operating periods. We inspect rigid sheet metal runs, high-capacity branch connections, and heavy duct fittings to isolate damage, seal leaking joints, and replace compromised industrial ducting to support steady system performance and air movement.

    What Customers Say About Our Duct Work

    4.7 average from 28 Google reviews across our 8 Google Business listings (listed as JS AirDuct). Every review shown is a real Google review.

    S
    Siejie
    ★★★★★ Google review

    Our cracked air duct system was causing us to lose so much heat and AC! After the repairs, our house stays comfortable, and our energy bills have already gone down. That team was very efficient and professional. Thank you!

    D
    Dayanah
    ★★★★★ Google review

    Needed someone to install an air duct. Thankfully, this excellent company was able to forward its technician right on time. He was a passionate and skilled guy who managed to do the service immediately and even managed to do it effectively.

    H
    Hanna M.
    ★★★★★ Google review

    After discovering mold buildup, I hired them for duct removal and replacement. They were so professional and made sure to contain all the dust while working. Everything looks brand new now, and the air smells so much cleaner. I’m grateful for their hard work and honesty!

    How Our Air Duct Repair and Replacement Service Works

    01

    Schedule Your Ductwork Service

    Your service begins when you contact Mint Air Duct Cleaning to describe your specific duct concerns, such as weak register airflow, sudden utility bill spikes, or visible attic damage.

    Our team gathers key details about your system and schedules a convenient appointment for a certified HVAC technician to evaluate your ductwork in person.

    02

    Inspect the Existing Ductwork

    Building on your initial report, our HVAC technician arrives on-site to perform a thorough physical evaluation of your duct network. We carefully examine all accessible main supply trunks, return lines, branch takeoffs, joint connections, and register boots in attics, basements, or crawl spaces to assess overall structural condition and material integrity.

    03

    Locate the Source of the Problem

    Using the inspection findings, our insured HVAC technician identifies duct-related faults that may explain the reported airflow problems. This includes checking for leaking seams, disconnected sections, crushed flexible ducts, damaged joints, and deteriorated materials.

    Our HVAC technician assesses the location and extent of each identified issue to distinguish isolated defects from broader ductwork damage that may require more extensive corrective work.

    04

    Determine Repair or Replacement

    Once all duct faults are identified, the HVAC technician evaluates whether targeted repairs or section replacements offer the most reliable long-term value. Isolated seam gaps, minor punctures, or loose collars are marked for repair, while severely collapsed, water-damaged, or heavily corroded duct runs are designated for full section replacement.

    05

    Review the Recommended Work

    Before any physical work begins, your HVAC technician presents a detailed service proposal outlining the exact scope of recommended repairs or section replacements. We explain our findings, discuss material options, answer your questions, and provide clear upfront pricing so you can approve the project plan with complete confidence.

    06

    Repair or Replace the Affected Ductwork

    After receiving your authorization, our HVAC technicians execute the approved repair or replacement scope using professional-grade tools and materials. We seal leaking seams with brush-on mastic, reattach separated flex runs, patch sheet metal openings, mechanically secure loose joint connections, or install brand-new, properly insulated replacement duct sections.

    07

    Check Airflow and Duct Connections

    Following the completed repair or replacement, our insured HVAC technician checks the affected duct sections, repaired joints, and newly installed connections. The final review confirms that accessible components are secured, sealing work is complete, and airflow-related operation has been checked where practical.

    Our team also explains the completed work and identifies any remaining ductwork concerns that may require attention.

    Why Choose Mint Air Duct Cleaning for Duct Repair and Replacement?

    Homeowners and commercial property owners choose Mint Air Duct Cleaning for air duct repair, replacement, and system sealing because of accurate duct diagnostics, honest structural recommendations, clear upfront costs, and quality workmanship without aggressive upselling. Our team evaluates flexible ducting, sheet metal trunks, and complex commercial air distribution layouts to recommend repairs or replacement based on actual ductwork condition, airflow requirements, and long-term performance value. With certified HVAC technicians and an inspection-first approach, we ensure your heating and cooling equipment delivers balanced, efficient airflow throughout your entire property.

    Certified, Licensed, and Insured Team: Our technicians are certified and insured, and fully qualified for cleaning, repair and installation work on residential and commercial duct systems.
    Modern Equipment: Professional agitation tools and HEPA vacuum extraction that follow current industry standards, so buildup is removed, not just stirred up.
    Professional Duct Inspection: Every job starts with an inspection of accessible trunks, branch runs, joints and register boots, so the work matches the actual condition of your ducts.
    Repair and Replacement Recommendations Based on Condition: Repair when repair is enough, replacement only when the ductwork can no longer be fixed reliably, and no aggressive upselling.
    Service 7 Days a Week: Our team books appointments 7 days a week, so you can schedule duct service at a time that suits your home or business.

    Air Duct Repair vs Replacement

    Repair your air ducts if the damage is localized to accessible seams, small holes, or isolated loose joints, and the surrounding material remains structurally sound, whereas replacement is better if the ductwork suffers from widespread deterioration, severe collapse, or extensive moisture contamination. However, age alone does not determine whether replacement is necessary, as well-maintained sheet metal and flexible duct runs with minor leaks can often be repaired for a fraction of full replacement costs.

    Repair May Be Suitable When

    Targeted repairs are the practical choice when the damage is local and the duct material is still sound.

    Small leaks or loose joints: Sealing individual gaps, tears, or disconnected joints with mastic sealant or foil tape resolves minor air loss.
    Isolated branch damage: If a single duct run in an attic or crawl space is crushed or torn, replacing just that section restores system function without replacing the whole network.
    Good overall condition and age: Ductwork under 15 to 20 years old without widespread corrosion, collapse, or structural degradation remains ideal for targeted fixes.
    Minor component disconnects: Re-securing loose flex collars, unfastened metal takeoffs, or fallen mounting hangers quickly re-establishes proper duct alignment and airflow.
    Cost-effective repair scope: The estimated cost to seal seams and repair minor punctures is substantially lower than complete system removal and installation.

    Replacement May Be Suitable When

    Replacing affected sections makes sense when damage is widespread or repairs would cost close to new ductwork.

    Advanced system age (15 to 20+ years): Aging flexible or rigid ductwork frequently suffers from brittle materials, failed insulation, and widespread seam breakdown that no longer meet performance standards.
    Widespread damage or mold contamination: Persistent moisture, pipe leaks, or high humidity cause deep mold growth inside lined ducts and flex liners that cannot be remediated safely without full section replacement.
    Severe airflow bottlenecks or improper sizing: Chronically uneven room temperatures caused by poorly designed layouts, undersized trunks, or incompatible duct sizing for upgraded HVAC units require a complete replacement configuration.
    Pest intrusions and insulation breakdown: Rodent infestations, torn vapor barriers, or collapsed flexible duct walls severely ruin interior linings and compromise overall distribution hygiene.
    Prohibitive repair expenses: The combined scope of repairing multiple leaking seams, crushed sections, and deteriorated joints approaches or exceeds the cost of installing a new duct system.

    Types of Air Ducts We Clean, Repair and Install

    The main types of air ducts in homes and commercial buildings are rectangular sheet metal, round spiral duct, insulated flex duct, duct board and fiberglass-lined metal duct. Each one collects dust, leaks and wears out differently, so the type of duct decides the cleaning tools, the sealing method and whether a damaged section is repaired or replaced. Our technicians identify the duct type during the inspection and match the work to it.

    Sheet Metal Ductwork

    Rectangular galvanized sheet metal is the standard material for main trunks and for ducts that must fit tight ceilings and walls. Its weak points are the many seams and joints, which we fasten mechanically and seal with mastic or foil tape.

    Spiral Duct

    Round galvanized steel duct formed with a continuous lockseam, so a run has fewer joints and less friction than rectangular duct. It needs more clearance, so it suits exposed ceilings, open commercial spaces and long straight runs.

    Insulated Flex Duct

    Flexible duct with its own insulation and outer jacket, common for branch runs in attics and crawl spaces. It works well only when pulled straight, strapped so it cannot sag and sealed to its collars; jackets crack with age and rodents chew through it.

    Duct Board

    Rigid insulated board formed into rectangular duct, so the insulation is the duct wall. It does not tolerate moisture or rough handling: older board crumbles at the edges and its tape lets go, so we tell you when a run should be replaced.

    Fiberglass-Lined Duct

    Sheet metal duct with an internal fiberglass liner that quiets airflow. Cleaning must not tear the liner, and according to the EPA no biocides are registered for use on fiberglass-lined duct or duct board, so sanitizing is limited on these runs.

    Signs You May Need Air Duct Repair or Replacement

    Common signs you need air duct repair or replacement include weak airflow, uneven room temperatures, visible duct holes or gaps, unusual duct noises, recurring air leaks, and deteriorating duct materials. These warning signs may indicate damaged connections, leaking joints, or structural problems that prevent conditioned air from reaching individual rooms. Mint Air Duct Cleaning provides professional air duct inspection, repair, and replacement services based on the condition of existing ductwork and the extent of damage.

    01

    Weak or Inconsistent Airflow

    Reduced airflow from supply vents may indicate leaking connections, disconnected duct sections, or damaged ductwork that prevents conditioned air from reaching individual rooms.

    02

    Uneven Room Temperatures

    Rooms that remain noticeably warmer or cooler than others may have damaged or leaking ducts that interfere with consistent heating and cooling distribution.

    03

    Visible Holes, Gaps, or Disconnected Sections

    Open seams, punctures, loose fittings, or separated duct sections are physical signs of damage that require professional inspection and possible repair.

    04

    Strange Duct Noises

    Rattling, whistling, or unusual vibration during HVAC operation may indicate loose duct connections, air leaks, or damaged sections that need attention.

    05

    Repeated Duct Leaks

    Air leaks that return after previous repairs may indicate deteriorating duct materials, weakened joints, or broader damage that requires further evaluation.

    06

    Old or Deteriorating Ductwork

    Rust, brittle materials, damaged insulation, or recurring connection problems may indicate that existing duct sections need repair or replacement.

    Ignoring signs of damaged ductwork can lead to continued conditioned air loss, uneven room temperatures, and reduced heating and cooling efficiency. Visible duct disconnections, recurring air leaks, or deteriorating duct materials may indicate problems that require professional inspection. If you notice these warning signs, contact Mint Air Duct Cleaning to schedule an air duct inspection and determine whether repair or replacement is necessary.

    What Causes Air Duct Damage?

    Air duct damage can result from aging materials, moisture exposure, corrosion, loose connections, physical impacts, or poorly fitted ductwork. These conditions can weaken duct sections, create air leaks, and restrict airflow, making professional air duct repair or replacement necessary.

    01

    Age and Wear

    Over years of continuous operation, thermal expansion and contraction cause joint sealants to dry out, cloth tapes to peel, and flexible duct materials to become brittle.

    02

    Moisture or Water Exposure

    Roof leaks, plumbing drips, or heavy condensation saturate external insulation, weaken fiberboard plenums, and degrade flexible duct wire cores.

    03

    Corrosion

    High humidity or ambient moisture in crawl spaces and basements causes sheet metal trunks, metal takeoffs, and connection fasteners to rust and weaken over time.

    04

    Loose or Separated Connections

    Failed mounting straps, degraded adhesives, or inadequate mechanical fasteners cause metal seams and flexible duct collars to pull apart under system pressure.

    05

    Physical or Accidental Damage

    Accidental stepping during attic storage, trade work, pest infestations, or heavy equipment contact can crush, puncture, or dent accessible duct runs.

    06

    Poor Previous Ductwork

    Substandard past repairs, unsealed joints, or poorly supported runs create long-term structural strain that leads to chronic air leaks and section detachment.

    What Affects Air Duct Repair and Replacement Cost?

    Air duct repair and replacement costs depend on the extent of damage, number of affected duct sections, existing materials, accessibility, and complexity of the required work. Minor duct leaks or loose connections may require localized repairs, while severely deteriorated ductwork may need partial or extensive replacement. Mint Air Duct Cleaning evaluates these factors during an inspection to determine the appropriate scope of work.

    Extent of the Damage: Minor seam leaks or localized tears require less labor and materials than widespread structural collapse or extensive moisture deterioration across the system.
    Number of Affected Sections: The total linear footage and number of individual duct runs needing repair or full replacement directly influence project time and material requirements.
    Duct Material: Costs vary depending on whether your property utilizes rigid sheet metal, insulated flexible ducting, or fiberboard plenums, as each material requires specialized fittings and sealants.
    Location and Access: Ductwork located in tight crawl spaces, high-pitched attics, or behind walls and ceilings requires additional labor and access setup compared to open-basement layouts.
    Repair or Replacement Scope: Simple tasks like resealing joints and reattaching loose collars are less labor-intensive than extracting severely deteriorated runs and installing new insulated ductwork.
    Complexity of the Work: Custom sheet metal transition fabrication, severe structural obstructions, or specialized mounting requirements can impact the overall time required to complete the job.

    Benefits of Repairing or Replacing Damaged Air Ducts

    Repairing or replacing damaged air ducts can improve airflow distribution, reduce conditioned air loss, and support more consistent indoor temperatures. When leaking connections, deteriorated materials, or damaged duct sections affect heating and cooling delivery, professional ductwork repair or replacement helps restore the affected air distribution pathways. Mint Air Duct Cleaning addresses these problems to improve ductwork performance and indoor comfort.

    01

    More Consistent Airflow

    Repairing leaks, removing restrictions, and securing loose connections restores proper static pressure within your duct network, ensuring registers deliver steady air volume into every room where damage previously caused airflow drops.

    02

    Reduced Air Loss

    Sealing open seams, patching jacket punctures, and replacing deteriorated duct sections eliminates conditioned-air loss, keeping heated or cooled air inside your ductwork rather than escaping into attics, basements, or crawl spaces.

    03

    More Consistent Room Temperatures

    Fixing compromised duct runs eliminates hot and cold spots across your property by ensuring conditioned air is distributed evenly to all connected living spaces as intended by your system design.

    04

    Improved Ductwork Performance

    Restoring intact connections and replacing crushed or leaking duct segments supports efficient air velocity, reducing internal drag and protecting your heating and cooling equipment from unnecessary operational strain.

    05

    Better Home Comfort

    Eliminating airflow restrictions and temperature fluctuations directly improves overall daily comfort, maintaining stable, predictable indoor climate control throughout every room in your home or commercial property

    Ready to Book Air Duct Repair and Replacement Services? Get an Upfront Price Today

    Call (855) 501-0191 or book online and a technician inspects first, explains the air duct repair and replacement services work your system needs and gives you a clear price before anything starts, 7 days a week.

    Our Complete Air Duct Services

    Mint Air Duct Cleaning provides professional air duct cleaning, mold-related duct concerns, new ductwork installation, and inspections for single-family homes, townhouses, multi-family apartments, commercial office spaces, and industrial facilities. Each service addresses specific ductwork needs to help property owners maintain clean, functional air distribution systems.

    Mint Air Duct Cleaning provides professional air duct cleaning services to remove accumulated dust, dirt, and loose debris from existing supply and return ductwork. Over time, these materials can collect inside duct sections, around vents, and near connections.

    Our air duct cleaning service focuses on removing accessible buildup using appropriate cleaning equipment while maintaining the condition of existing duct components.

    For residential and commercial properties with suspected mold in air ducts, Mint Air Duct Cleaning offers duct inspections to evaluate visible growth, moisture exposure, and affected duct materials. Mold-related concerns may develop when ductwork or insulation remains damp due to condensation or water intrusion.

    Our team assesses accessible areas and recommends appropriate professional services based on the findings, including further evaluation by a qualified mold remediation specialist when necessary.

    Our air duct installation services cover new ductwork for residential and commercial properties that require additional or newly configured air distribution pathways. Unlike duct repair or replacement, installation involves fitting new supply or return duct sections to serve the property’s heating and cooling requirements.

    Mint Air Duct Cleaning installs suitable duct materials, connects new sections, and secures the ductwork to support effective airflow throughout the designated areas.

    Mint Air Duct Cleaning provides air duct inspection services to assess the condition of existing ductwork before recommending cleaning, repair, or replacement. Our insured HVAC technicians examine accessible duct sections, seams, joints, and connections for visible leaks, physical damage, loose fittings, and deterioration.

    The inspection helps identify duct-related problems and determine which services are appropriate for maintaining the property’s air distribution system.

    Air Duct Brands We Repair and Replace

    At Mint Air Duct Cleaning, we repair and replace air ducts from various manufacturers, including ATCO, J.P. Lamborn, Hart & Cooley, Imperial, CASCO, DuctSox, Crown Products, and Linx Industries, subject to confirmation of brand-specific service availability. Our certified and insured HVAC technicians inspect existing duct systems, identify damaged sections, and recommend suitable repair or replacement solutions based on the duct material, manufacturer specifications, and overall condition.

    1
    ATCO Air Duct Repair and Replacement
    2
    J.P. Lamborn Air Duct Repair and Replacement
    3
    Hart & Cooley Air Duct Repair and Replacement
    4
    Imperial Air Duct Repair and Replacement
    5
    CASCO Air Duct Repair and Replacement
    6
    DuctSox Air Duct Repair and Replacement
    7
    Crown Products Air Duct Repair and Replacement
    8
    Linx Industries Air Duct Repair and Replacement

    Real Duct Work From Our Crews

    Photos from our own Google Business Profiles showing the dust, lint and damage we find before we clean or repair.

    Lint packed inside a dryer vent line before cleaning
    Lint packed inside a dryer vent line before cleaning
    Google Business photo
    Furnace blower wheel caked with dust before cleaning
    Furnace blower wheel caked with dust before cleaning
    Google Business photo
    Dust-coated return air vent and grille
    Dust-coated return air vent and grille
    Google Business photo
    Blower motor and housing during a duct system cleaning
    Blower motor and housing during a duct system cleaning
    Google Business photo
    Register boot opened up for inspection and cleaning
    Register boot opened up for inspection and cleaning
    Google Business photo

    Schedule Air Duct Repair or Replacement With Mint Air Duct Cleaning

    Are weak airflow, uneven room temperatures, or recurring duct leaks affecting your property? Mint Air Duct Cleaning provides residential and commercial air duct repair and replacement services for damaged, disconnected, and deteriorating ductwork. Our certified and insured HVAC technicians inspect existing ducts, identify problems, and recommend suitable solutions based on duct condition. Call (855) 501-0191 to schedule air duct repair or replacement with Mint Air Duct Cleaning. Our HVAC technicians will assess the damage, explain your repair or replacement options, and review the recommended work before service begins.

    1
    Call (855) 501-0191 or Book Online
    2
    Describe the Damage or Airflow Problem
    3
    Confirm Your Inspection Window
    Book a service






      Air Duct Tips and Guides

      Residential Air Duct Cleaning: The Right Company You Should Hire
      Air Duct Cleaning

      What to look for when you hire a residential air duct cleaning company, from equipment and process to clear pricing.

      Prepare Your Home for the Upcoming Holidays With Clean Ducts
      Indoor Air Quality

      Why clean ducts before guests arrive, and how duct cleaning helps your home feel fresher during the holidays.

      Which Household Appliances Can Generate Mold Growth
      Mold & Moisture

      Household appliances that can create moisture and mold, and what that means for your air ducts.

      Air Duct Repair and Replacement FAQs

      Can One Section of Air Duct Be Replaced Without Replacing All the Ductwork?

      Yes, one section of air duct can be replaced without replacing the entire ventilation network. Certified HVAC technicians can isolate damaged, crushed, or deteriorated flex runs or sheet metal trunks and splice in new, properly insulated duct sections. This targeted approach restores proper system airflow and seals localized leaks while keeping the remaining functional ductwork fully intact.

      Yes, damaged, disconnected, crushed, or leaking ductwork can directly cause some rooms to be much hotter or colder than others. When air ducts leak or become restricted, conditioned air escapes into unconditioned spaces like attics or crawl spaces before reaching its intended destination. This pressure drop prevents balanced temperature distribution, leaving rooms furthest from the main HVAC unit chronically uncomfortable.

      Yes, air ducts can be repaired in an attic, although the appropriate solution depends on the duct material, accessibility, and extent of damage. An HVAC technician can seal leaking joints, reconnect separated sections, and repair localized damage when the surrounding material remains suitable. Severely crushed, deteriorated, or moisture-damaged attic ducts may require replacement instead of repair.

      Yes, air duct repair may require opening walls or ceilings if the damaged sections are concealed behind finished surfaces and cannot be accessed otherwise. However, ducts located in accessible attics, basements, crawl spaces, or utility areas can often be repaired without opening interior walls or ceilings. An HVAC technician evaluates the duct location and required work before determining whether additional access is necessary.

      Air duct repair or replacement can take 2 to 4 hours for basic repairs, such as sealing accessible leaks or reconnecting loose duct sections, while extensive ductwork replacement may take 1 to 4 days. The actual timeline depends on the number of affected sections, duct material, accessibility, and complexity of the work. An HVAC technician can provide a more accurate time estimate after inspecting the existing ductwork.

      No, you do not need to leave your home during air duct repair or replacement services. Our HVAC technicians work within designated work zones, such as attics, basements, or crawl spaces, minimizing disruption to your normal daily routine. The heating and cooling system will be turned off temporarily while work is actively being performed, but the property remains completely safe and habitable throughout the service.

      Yes, old ductwork can be repaired instead of replaced, depending on its overall structural integrity, material condition, and the extent of existing air leaks. If aging rigid metal trunks remain sturdy and free of widespread corrosion or mold, HVAC technicians can effectively seal leaking seams and re-secure loose joints. However, if the system suffers from brittle flex lining, collapsed passages, or widespread material degradation, replacing the old ductwork is the more cost-effective choice for long-term energy efficiency.

      Book Air Duct Repair or Replacement

      Leaking joints, crushed runs or ducts that no longer hold together: we inspect first, explain repair or replacement, and give an upfront price before work begins.

      Call (855) 501-0191 or send the form, 7 days a week.

      Book a service






        Seraphinite AcceleratorOptimized by Seraphinite Accelerator
        Turns on site high speed to be attractive for people and search engines.